Visit the official COVID-19 government website to stay informed. www.sacoronavirus.co.za

KENNEDY BRAKE FLUID TESTER

(0 Reviews)

~~R849,00~~

R849,00

incl. VAT

This ingenious tool is invaluable in the garage workshop for testing the quality of brake fluid. Testing for moisture content in the fluid by resistance to electric current. You get instant results from the built-in LED indicator light system. (Runs on 1 x 1.5V AAA battery).

Applications

Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance. Red indicates the brake fluid needs immediate replacement, green represents good condition, yellow indicates the state is acceptable but soon replaced.

LED Indicator Display:

1.The green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified.

2.The yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later.

3.The red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced.

4.LED red flashing: battery replacement.

5.LED yellow: low moisture content, check again in six months.

6.LED green: brake fluid lines / cell row

Technical parameters:

Green: Battery OK, that is, brake fluid does not contain water.
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.